在Linux下使用華為E3272(非HiLink版本)4G手指

Submitted by saladlam on

原文貼在HKEPC。

因為要幫隻Linux Router換走Sierra 320u,所以才會寫這篇文章。

  1. Firmware Version為22的,是HiLink版本。HiLink是4g modem同broadband router合體的產物,好不好用見人見智。我新買回來的是Version 22.491.03.00.00。
  2. Refresh Firmware。Firmware Version為21的,不包含HiLink。我用Huawei E3272s-153 21.470.05.00.00 normal。
  3. 在Windows裝MobilePartner(要自已上網找)。設定好E3272,試試連線上網。
  4. Linux不用安裝usb_modeswitch,因為E3272已經是Modem Mode。我用Ubuntu 14.04,一插入電腦,已經自已識找driver。
  5. 控制E3272的serial port是/dev/ttyUSB1,連線的AT指令是AT^NDISDUP=1,1,"<apn>"。斷線的AT指令是AT^NDISDUP=1,0。
  6. 用ddclient取ip。
  7. ifconfig要設定interface為NOARP,指令為ifconfig <interface> -arp。

Add new comment

The content of this field is kept private and will not be shown publicly.

Restricted HTML

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type> <li> <dl> <dt> <dd> <h2 id> <h3 id> <h4 id> <h5 id> <h6 id>
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.
CAPTCHA
Enter the characters shown in the image.
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.